|
|
PRISM - Monitoring Module
The monitoring module was developed to monitor the
success or failure of types of salmon protection and restoration projects.
The system will randomly select a number of worksites from funded projects
for detailed monitoring. The module will capture data based on protocols
developed and adopted by the Salmon Recovery Funding Board (SRFB). This
data, collected in the field, will be analyzed and used to produce reports
that will provide an additional tool to the SRFB to determine where
to place its limited resources in the future. This module was developed
in September 2003 and data will be collected over a number of years.
To view data in the PRISM Monitoring utility just
download and install the software. At the login screen, just put a check in the Read Only box
System Requirements
To run this software from your computer you will need:
- Connection to an Internet Service Provider (ISP). If you are behind a firewall, TCP Port 1433 must be open for outbound
trafficDial-up modem or high speed internet access (e.g. T-1 line, cable
modem, or DSL) 35 MEG hard disk space
- 16 MEG of RAM (32 is preferable) Pentium Class Processor AND one
of these operating systems: Windows 95, Windows 98, Windows NT, Windows
ME, Windows 2000, or Windows XP (sorry, we do not support MACs)
Download Instructions (broadband or faster, for slower dial
up modems see below)
- Click on the download link below.In the File Download box, select Save this program to disk, and
click OK.In the Save As box, under Save in select Desktop, and click Save.When the download is complete you will have an icon on your desktop.Close all running programs.Double click on the new icon, this will install the PRISM Software.
You will be asked to reboot your computer.Then, go to Start, Programs, PRISM and click on the blue triangle.
- When PRISM is installed and functioning properly you can delete
the icon from your desktop.
(approximately 60 minutes at
33.6 Kbps)
Slower Dial Up Modems If you need the complete installation but are having trouble downloading
large files, this method will download the complete installation in
four smaller files. Download each of the four files below to the same
location on your hard drive. We recommend that you create a new folder
on your desktop called PRISM and then:
- Click on Part I below.When the File Download window appears select Save This Program to
Disk.When the Save As window appears make sure you note where on your
hard drive you are saving the file (if you created a new folder save
it there) and click Save.Do this for all three files.When you have all three files in the same location on your hard
drive go to that folder and click on the InstallCabs.exe file.When prompted for disk 2, browse to the location of the data2.cab
file (it should be in the same folder with the other two files) and
click OK.When finished you will be prompted to restart your computer. Then, look for the blue triangle under Start, Programs, PRISM.
- If PRISM is working correctly, delete the PRISM folder you created.
That's all there is!
Still having trouble downloading PRISM? E-mail us for a copy of PRISM on a CD. Don't forget to include your name and
address!
|
|
|
